User`s guide

Network Camera User’s Guide
The procedures are
• Connect to the LAN by DHCP or Fixed IP
• Access the Network Camera, enter Setting Î Network.
• Check the radio button of “PPPoE Setting”.
• If the ADSL Modem and Network Camera were connected on a hub, after the
Network Camera information were inputted, and then you can press “Dial” to do
the PPPoE dial.
• Input the “User” and “Password” fields by the account and password provided by
the ISP.
• If the check box of “Send Mail after dialed” was checked, then the “MailServer“ and
“User on the MailServer” field need to be filled.
• If the mail server needs authentication, then the check box of “Password” needs to
be checked, and password information need to inputted.
• Also the “Sender email”, “Receiver email” needs to be inputted.
• The “Subject” field can be modified too.
• Select “Save” to save the setting.
If the PPPoE option “Send mail after dialed”, then when PPPoE dialed up to ISP, a mail
that contains the Dialup IP Address/ Netmask/ Gateway address/ DNS Server address
will be mailed to preset e-Mail address.
31/82