User`s guide

Network Camera User’s Guide
PPPoE:
PPPoE: Stands for Point to Point Protocol over Ethernet
A standard builds on Ethernet and Point-to-Point network protocol. It allows a local PC
with xDSL or cable connects with broadband network. Also this local PC gets a dynamic
IP address. For more PPPoE and Internet configuration, please consult your local dealer
or ISP.
The Network Camera can directly connect to the ADSL, however, it should be setup on
LAN environment to setup the PPPoE information, and then connect to the ADSL
modem. Power on again, then the Network Camera will dial on to the ISP connect to the
WAN through the ADSL modem.
30/82