User`s manual

This switch supports Jumbo Frame function. And the maximum packet size

could be up to 9600 byte/packet. You can select the maximum packet size for

each port here.

4). Mirror Port Configuration

This switch operates in store-and-forward algorithm so it is not possible to monitor

network traffic from another connection port. But the port mirror function can

copy packets from some monitored port to another port for network monitor.

Mode: This is used to enable/disable Mirror function.

Monitering Port: This is used to set the capture port. The switch will copy the

traffic from Monitored Port to this port if Mirror function is enabled.

Monitored Port: This is the monitored port. The switch will copy the traffic from

this port to Monitoring Port.