User`s manual

5. Quiet Timeout Period:

This is the quiet time value between the switch and the user before next

authentication process when authentication fails.

6. Tx Timeout Period:

This is the timeout value for the identification request from the switch to

users. The request will be re-tried until the Re-authentication Max Count

is met. After that, authentication fail message will be sent. The valid value

is 0~65535.

[Radius Server Configuration]

This function is for configuration between switch and RADIUS server. You can

assign the IP address of Radius Server, the protocol port number, and the

security key.

[Port Authentication Configuration]

The Port Authentication Configuration is used to select the authentication mode

for each port of the switch.

1. Auto: This is the normal 802.1x operation mode. The authentication status

(authenticated or unauthenticated) depends on the authentication result of

port.

2. Force-Authorized: This mode will force the port always being authentication

successful in 802.1x process and the real authentication result will be

ignored.

3. Force-Unauthorized: This mode will force the port always being

authentication fail in 802.1x process and the real authentication result will be

ignored.

4. None: This mode will disable 802.1x operation on this port.

And you can see current 802.1x status on each port.