User`s manual

6.4.2 SNMP

This function is used to configure SNMP function of the switch. This switch

supports SNMP v1 & v2c agent function and MIB II(Interface), Bridge MIB,

802.1Q MIB and Private MIB.

[System Information]

Object ID: this is the SNMP Object ID of the switch for SNMP management.

Up Time: this is the power-up running time of the switch.

Name: this the host name of the switch.

Contact: this is the contact information for the switch.

Location: this is the location information of the switch.

[SNMP -- Communities]

Get: this is the community string of GET command for SNMP operation. GET

command is used to read switch configuration/information.

Set: this is the community string of SET command for SNMP operation. SET

command is used to set switch configuration.

[SNMP — IP Trap Manager]