User`s manual

Users can configure System Log function and view log records here. If this
function is enabled, the switch will record events to a log file and put the log file to
flash.
Up to 512 records are allowed for local logging. If more than 512 events
happen, the records will be overwritten from beginning. And if remote
syslog server is applied, the switch will also send event record to the syslog
server.
About log function configuration ...
System Log Status : This can enable/disable system logging function.
Log Level (0~7) : Log levels 0~7 are defined ad below.
Level Name Description
0 Emergency System is unusable
1 Alert Action must be taken immediately
2 Critical Critical conditions
3 Error Error conditions
4 Warning Warning conditions
5 Notice Normal but significant condition
6 Informational Informational messages
7 Debug Debug-level messages
Remote Log : This can enable/disable remote syslog function.
Remote Log Server IP : This is the syslog server IP for remote logging. Up to
five syslog servers is supported. Event logs will be sent to those syslog servers
at the same time.
[ Log Table ]
63