User`s manual

6.4.1 System

“System Information” is the homepage of the switch. And there are four sub-

functions for it.

1). System Information

This function lists the system information about the switch. You can find the

firmware version, Mac address, connection port number, and maximum VLAN

group number here.

2). IP Configuration

This function is used to setup the IP configuration of the switch.

You can enable DHCP client function to get IP configuration from DHCP server

automatically. Or, disable DHCP client function and set IP configuration

manually.

Management VLAN : This is used to setup the VLAN ID for remote management

interface of the switch. Only users in the same VLAN can manage the switch