User`s manual

57
show trunk group x command is used to show port member settings of Trunk
Group x. (“x” is the trunk group index.)
23. show version command
This command is used to show system version information and model
information.
For example,
# show version
Serial number:: 0000000001
Firmware Version: 1.01.09 (built at Aug 6 2008 14:38:24)
Number of Ports: 10
Model Name: Gigabit L2 Management Switch
24. show vlan command
This command is used to show VLAN configuration of the switch.
# show vlan ?
private-vlan Private VLAN
id VLAN interface
name VLAN interface name
<cr>
show vlan command is used to show all VLAN settings (VLAN ID, VLAN Name,
VLAN Type, and Assigned ports).
show vlan id x command is used to show VLAN setting of VLAN x. (“x” is the
VLAN ID).
show vlan name yyy command is used to show VLAN setting of VLAN yyy.
(“yyy” is the VLAN name).
For example,
# show vlan id 100
Vlan ID: 100
VLAN Type: Static
Name: P100
Ports/Port channel:
# show vlan name P100
Vlan ID: 100
VLAN Type: Static
Name: P100
Ports/Port channel:
show vlan private-vlan command is used to show Private VLAN setting.
For example,
# show vlan private-vlan
[Private VLAN Port Configuration]
Port# Port Type Primary VLAN Community VLAN Isolated VLAN
==============================================================