User`s manual

==============================================

1/1 No Limit No Limit

1/2 No Limit No Limit

1/3 No Limit No Limit

1/4 No Limit No Limit

1/5 No Limit No Limit

1/6 No Limit No Limit

1/7 No Limit No Limit

1/8 No Limit No Limit

1/9 No Limit No Limit

1/10 No Limit No Limit

18. show snmp command

This command is used to show SNMP configuration of the switch.

For example,

# show snmp

[SNMP Configuration]

Object ID : 1.3.6.1.4.1.655.100.2.1

System up Time: 4015 (seconds)

System Name :

Location :

Contact name :

Get Community : public

Set Community : private

[Trap Community]

ID Status Community IP Address

1 Disabled public 0.0.0.0

2 Disabled public 0.0.0.0

3 Disabled public 0.0.0.0

4 Disabled public 0.0.0.0

5 Disabled public 0.0.0.0

19. show sntp command

This command is used to show system time settings of the switch.

For example,

# show sntp

====================================

[Time Configuration]

====================================

Get Time By : Manually

Time Server : 220.130.158.54

Time Zone : Japan(+9)(37)

Current Time : 1970/01/01-10:08:38

====================================

20. show spanning-tree command

This command is used to show spanning tree configuration of the switch.