User`s manual

48
==========================================
Rx Counter Statistics
Good Unicast Frame 4109
Good Broadcast Frame 9946
Good Multicast Frame 158
Discarded Frame 0
Errors 0
Total Receive Byte Count 1549816
==========================================
Tx Counter Statistics
Good Unicast Frame 2001
Good Broadcast Frame 18
Good Multicast Frame 0
Discarded Frame 0
Errors 0
Total Transmit Byte Count 873047
show interface status command will show port status of all ports (one after
another).
show interface status ethernet 1/x command will show port status of Port x.
(“x” is the port number).
For example,
# show interface status ethernet 1/5
Basic information:
Port type: 1000TX
Mac address: 00:C0:F6:64:99:6F
Configuration:
Name:
Port admin: Enable
Speed-duplex: Auto_off
Capabilities: 10half,10full,100half,100full,1000full
Broadcast storm: Disable
Flooded unicast storm: Disable
Multicast storm: Disable
Flow control: Disable
LACP: Disable
Max MAC count: 10
Maximum Packet Length: 1518
Current status:
Link status: Down
Operation speed-duplex: 1000Half
show interface switchport command will show function configuration of all
ports (one after another).
show interface switchport ethernet 1/x command will show function
configuration of Port x. (“x” is the port number).
For example,
# show interface switchport ethernet 1/5
Information of Eth 1/5
LACP: Disable
Ingress rate limit: Disable
Egress rate limit: Disable
VLAN membership mode: access