User`s manual

47
1/6 Force-Authorized
1/7 Force-Authorized
1/8 Force-Authorized
1/9 Force-Authorized
1/10 Force-Authorized
show dot1x configuration command is used to show 802.1x configuration and
status of the switch. For example,
# show dot1x configuration
[802.1x Configuration]
802.1x System Authentication Status: Disable
Re-authentication: Disable
Re-authentication Timeout Period : 3600 seconds
Re-authentication Max Count: 2
Max Request Count: 2
Server Timeout Period: 30 seconds
Supplicant Timeout Period: 30 seconds
Quiet Timeout Period: 60 seconds
Tx Timeout Period: 30 seconds
3. show gvrp command
This command is used to show current GVRP configuration.
show gvrp configuration command will show current GVRP configuration.
# show gvrp configuration
GVRP configuration: Disable
4. show history command
This command is used to show the input commands history.
# show history
0. show
1. show gvrp configuration
2. show history
5. show interface command
This command is used to show port information and status.
# show interface ?
counters Interface counters information
status Interface status information
switchport Interface switchport information
show interface counters command will show statistics counters for all ports.
show interface counters ethernet 1/x command will show statistics counters
for Port x. (“x” is the port number).
For example,
# show interface counters ethernet 1/3
Port: 1/3