User`s manual

101
[ 16TX+4SFP Model ]
Access Method Ethernet, CSMA/CD
Standards Conformance IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE
IEEE 802.3z, IEEE 802.3ab (1000Base)
Communication Rate 10/100/1000Mbps,
Full / Half duplex (auto-negotiation)
MDI/MDIX Auto-detect for each TX port
Indicator Panel LEDs for each unit : Power, System
each port : Link/Act(Green:1000M,
Yellow:10/100M), FDX/Col.
Number of Ports 16* RJ45 TX, 4* SFP(shared) ports (16 GE Ports
totally)
Dimensions 330 x 204 x 43 mm
Certification CE Mark, FCC Class A
Temperature Standard Operating: 0 to 50℃
Humidity 10% to 90% (Non-condensing)
Bridging Function Filtering, forwarding and learning
Switching Method Store-and-forward
Address Table 8K entries
Filtering/Forwarding Rate Line speed
Maximum Packet Size 9600 Bytes
Flow Control 802.3x for full duplex, backpressure for half duplex
VLAN 802.1Q VLAN, Port-based VLAN, Private VLAN
QoS 4 transmit priorities per ports, for port-based/802.1P
tagged-based/DSCP priority operation
Spanning Tree Support RSTP/STP protocol
Trunking 8 groups max., Static and LACP are supported
Mirror Port Yes
IGMP Snooping Yes, for IP multicast traffic
Mac ID Security on Port Static Mac address access limit on port,
and Dynamic Mac address number limit on port
802.1x Yes, support Authentication and Transparent modes
Rate Control Yes, 128Kbps~1000Mbps, for ingress/egress traffic
Storm Control Broadcast, Multicast, and Unicast Storm Control
Admin Manage Security Yes, by IP/Subnet/Interface limit
System Time Yes, by NTP protocol
System Log Yes, Local and Remote (by syslog) logging
Out-band Management Console
In-band Management http, telnet, and SNMP
SNMP v1 and v2c agent, support MIB-II,Bridge MIB,802.1Q
MIB and Private MIB
Software Update/Backupby http,TFTP protocols, Xmodem, for firmware/
configuration