User`s guide

Connections Getting

Started

SetupBasic

Operations

Advanced

Features

Help

System Information

View the system information for your ReplayTV. This information includes:

• the version of software your ReplayTV is using

• the Serial Number of your ReplayTV

• video setup, including IR blaster code and channel lineup

• phone number your ReplayTV uses for dialing the ReplayTV Service

• IP address

• MAC address

:: Remote Control Setup

Follow these steps to program the remote control to operate your television, TV/VCR combo or TV/DVD combo. When pro-

grammed, the ReplayTV remote will control your TV’s power and volume.

1 Press and hold the Mute and TV (Power) buttons until the LED blinks twice.

2 Enter the 4-digit code for your brand of television (see codes on pages 26-28).

• For example, for Sony, press Mute and TV (Power) simultaneously, and then press 0-0-0-0.

• If a valid code has been entered, the LED at the top of the remote will blink twice.

• If an invalid code has been entered, there will be one long blink and the remote will revert to the previously programmed code.

3 To test the code, press the TV (Power) button on the remote control.

• If your TV turns on/off, programming is complete.

• If your TV does not turn on/off, try another code for your brand of television. Not all TVs can be programmed.

• To clear all settings, press Mute + TV(Power), then press 9-8-1.

ReplayTV5.5 UG.book Page 23 Friday, August 1, 2003 10:58 AM