User`s guide

16
ReplayTV 5500
Router Setup
Any router should work with ReplayTV. Default router settings are normally sufficient for ReplayTV to connect to the ReplayTV
Service. Refer to the following information only if you are experiencing connection issues.
Recommended Routers
1 DHCP is enabled by default on most routers. Verify that it is enabled.
2 TCP ports 53 (DNS), 123 (NTP), and 80 (http) are normally open by default.Verify that they are open on your router. If your
PC that is connected to the same router can browse the Web, you can normally assume that ports 53 and 80 are open.
Entering Networking Information Manually on ReplayTV
The manual entry screen will display if ReplayTV is unable to obtain an IP address automatically during first-time setup.
1 Press Menu on the remote control and choose Setup.
2 Choose Network and Input Settings from the Setup menu.
3 Choose Change Network.
4 Choose Change from Automated to Manual and enter the information.
Make Model
Netgear RT311
Netgear RP114
SMC Barricade SMC7004BR
Linksys BEFW11S4
ReplayTV5.5 UG.book Page 16 Friday, August 1, 2003 10:58 AM