Q U ICK S TART GU I D E
A B C D E F (A) Power On, Start Record (B) Power Off, Stop Record (C) Removable Lens Cover (D) Removable End Cap (E) Rec On/Off LED (F) Power On/Off & Status LED (G) Micro USB Port (H) Charging Status LED (I) microSDHC Slot (*) Master Reset * G MICRO USB H I O RIENTATI O N
SIDE VIEW REAR VIEW USB MICRO USB MICRO USB 2.0 CHARGE/SYNC CABLE Charge 1. Remove rear protective cap and connect the supplied micro USB cable into the Replay XD. 2. Make sure that the small switch on the micro USB cable is in the CHARGE position. (A standard micro USB cable will also work.) 3. Plug the USB cable into the supplied AC Wall Adapter, Car Adapter, or a PC/Mac USB 2.0 port. 4. The green charging status LED at the rear of the RePlay XD will illuminate to tell you it’s charging.
12 9 3 6 There are two references for accurately aligning your RePlay XD. 1. The Start REC button should always point up or at the 12 o’clock position for a level horizon. 2. The blue POWER LED and red REC LED are at 3 o’clock & 9 o’clock and can act as a horizontal level. 3. The laser etched logos on the side of the Replay XD are level and can act as tilt indicators. 4.
FLAT SWIVEL MOUNT OPTIM AL CA MERA ANGLE ILLUSTRATION PG. (5) SETU P APPROX. ANGLE 15° – 20º FLAT/CLIP TILT MOUNT OPTIM AL CA MERA ANGLE SETU P LEVEL SURFACE SETUP The RePlay XD comes with two simple mounts: 1. The most common mount will be the FLAT SWIVEL MOUNT. This mount can be used to mount the RePlay XD almost anywhere. Use the supplied 3M dual lock mounting strips for a secure mount. 2.
FLAT SWIVEL MOUNT ACTUAL LINE OF SIGHT (HORIZON LINE) FLAT/CLIP TILT MOUNT TION D POSI G HEA RIDIN ACTUAL LINE OF SIGHT ILLUSTRATION PG. (6) Mounting angle and setup: 1. When using a FLAT SWIVEL MOUNT or FLAT/CLIP TILT MOUNT it is important to mount them at an optimal position. Please reference the illustrations on page (5) & (6). 2. When mounting to a helmet, most people have a tendency to lower their head from 15º to and excess of 20º.
A B Press A to START Recording. Press B to STOP Recording. Your Done. 1. Hold down the front button for 2 seconds and release, the RePlay XD will vibrate, illuminate the blue power LED, illuminate the red REC LED and automatically start recording. Note: The red LED will only illuminate when there is a memory card inserted properly in the RePlay XD. 2. Hold down the rear button for 2 seconds and release, the RePlay XD will vibrate to notify you that it is saving the file and powering down.
OPTIONAL CAP 1 OPTIONAL CAP 2 There are two optional rear protective caps for your RePlay XD, each cap allows for a different audio characteristic. Before your adventure, select the optional cap that best suits your application for optimum audio quality. 1. To allow for recording of “voice level audio” use Optional Cap 1. This cap is designed for low noise environments i.e., Walking, Hiking, or an Automobile Cockpit. This cap option may exhibit increased wind noise in fast paced environments. 2.
REAR VIEW FRONT VIEW USB MICRO USB MICRO USB 2.0 CHARGE/SYNC CABLE 1. Remove rear protective cap and use option (1) or option (2). 2. Option (1): Take the microSDHC out of the RePlay XD and use a SDHC compatible card reader to transfer your files to your computer. 3. Option (2): Connect the supplied micro USB cable into the micro Replay XD. 4. Make sure that the small switch on the micro USB cable is in the USB position. (A standard micro USB cable will also work.) 5.
Your RePlay XD records and saves to a file called an AVI. Your video file is compatible with most current media players on a PC or Mac. Many video editing software titles are compatible out of the box such as: Adobe Premier, Apple Final Cut, iMovie, & Windows Movie Maker. PC - Windows XP and later MAC - Mac OS X 10.4 and later For Easy Viewing: • Windows Media Player, Apple Quicktime, or VLC Player For Easy Viewing: • Apple Quicktime, VLC Player For Quick Editing: (e.g.
STABLE IMAGING SOLUTIONS, LLC. LIMITED WARRANTY WHAT THE WARRANTY COVERS Stable Imaging Solutions, Llc. (SIS) warrants for 180 days from the date of purchase of product it will be free from defects in material and workmanship. WHAT IT DOES NOT COVER This warranty does not cover damage due to: • Accidents of any kind • Exposure to pressure, extreme temperatures (outside of -20ºC to 45ºC), and submersion in water.
STABLE IMAGING SOLUTIONS, LLC. DISCLAIMER All purchasers, users, and any or all parties involved or engaging in the use of Stable Imaging Solutions, Llc. (“SIS”) products agree to the following: • SIS does not promote or endorse careless and or dangerous actions when using its products. • SIS is not liable for any use or misuse of SIS products in applications other than those for which it was designed.
