Specifications

CHARGING

1. Power on the ReView Field Monitor to check the battery status. A battery icon will appear at the right side

of the screen. Please recharge if necessary.

2. To charge make sure the power is o

3. Plug a standard Mini USB cable into the ReView Field Monitor USB Mini port (E).

(OPTIONAL if you have a Replay XD1080 USB cable, plug a Replay XD1080 Mini USB 8-pin cable into the

ReView Field Monitor USB 8-pin port (D). YOU MUST ONLY USE ONE USB CABLE AT A TIME.)

4. Plug the opposite end into a Replay XD power adapter, car charger, or a PC/Mac USB 2.0 port.

5. The status LED (C) will illuminate red when charging, when the battery is full and charging is complete the red LED will turn off.

Note: The Mini USB port is for charging only. Only use ONE USB cable at a time, either the Mini USB 8-pin or the Mini USB.

DAMAGE MAY OCCUR IF YOU CHARGE WITH TWO USB CABLES PLUGGED IN AT THE SAME TIME.

E D