TrackMix WiFi TrackMix WiFi with 4K 8MP Ultra HD resolution captures images with great details. Discover more when zooming in. It can distinguish people, vehicles and pets* from other objects, providing more accurate alerts. Plus, you can talk back via the camera's built-in mic and speaker. 1.
1 Micro SD Card Slot 2 Reset Button 2. Setup and Install Set up the Camera What’s in the Box Note: The package content may vary and update with different version and platforms, please take the below information only for a reference. And the actual package content are subject to the latest information on the product selling page.
Pack of Screws*1 Mounting Template *1 4.5m Power Extension Power Adapter Cable *1 12V/2A *1 Waterproof Lid *1 Set up the Camera on the App There are two methods to do the initial setup of the camera: 1. with a Wi-Fi connection; 2. with a network cable connection. 1. With Wi-Fi Connection Step 1. Tap the icon in the top right corner to add the camera. Step 2. Scan the QR code on the camera.
Step 3. Tap Choose Wi-Fi Connection to configure the Wi-Fi settings. Step 4. After you hear the voice prompts from the camera, tick “I have heard the voice played by the camera“ and tap Next.
Step 5. Select a WiFi network, enter the WiFi password, and tap Next. Step 6. Scan the QR code on the app with the camera lens. Tap Scan Now. The QR code will be generated and displayed on your phone. Please hold your phone in front of the camera at a distance of about 20 cm (8 inches) and have the phone face the camera lens to let the camera scan the QR code.
After you hear the beep sound, tick "I have heard a beep sound from the camera" and tap Next. Step 7. After you hear a voice prompt "Connection to the router succeeded" from the camera, tick "I have heard the voice prompt" and tap Next.
step. Step 8. Create a login password and name your camera. Step 9. Initialization finished. Tap Finish, and you can start live viewing now. 2.
the camera to your router's LAN port with an Ethernet cable, and follow the steps below. Step 1. If your phone, the camera, and the router are on the same network and you've enabled the Add Device Automatically option in the App Settings, you can tap and select this device on the Devices page and skip to Step 3.
Otherwise, you can tap the icon in the top right corner and scan the QR code on the camera to add the camera. Step 2. Tap Choose Network Cable Connection. Please make sure the camera is connected in the correct way, as shown in the diagram, and then tap Access the Camera.
Step 3. Create a device password and name the device. Step 4. Select the WiFi network that you want to join, enter the password of the WiFi network, and tap Save to save the configuration.
Step 5. Initialization finished. Tap Finish, and you can start live viewing now.
Install the Camera Following the excitement of setting up your TrackMix, you will face up the installation of the camera. So we are here to help you with guides on how to mount the TrackMix camera on the wall or the ceiling. It's up to you. Mount the Camera on the Wall Step 1. Stick the mounting hole template on the wall and drill holes correspondingly. Step 2. Screw the mount base to the wall using the screws included in the package. Step 3.
Note: Use the drywall anchors included in the package if needed.
