User Manual

System -> System Maintain
45
To maintain the NVR, it is suggested that it be rebooted periodically. In much the same way that a
computer can become unstable if left on for an extremely long time, the NVR can become unstable too. It is
strongly suggested that the NVR be rebooted at least once per week.
However, as this can be a hassle, you may set the NVR to reboot itself.
Enable auto reboot: Will automatically
shut the NVR down and restart it at a
certain time.
Auto reboot at: Choose when you would
like the NVR to reboot.
Firmware Upgrade (Upgrade): Instructs the NVR to update its firmware. You will only need to use this
option if instructed to do so by our Technical Support. (Remember to Export your configuration first so
you don’t have to re-set everything!)
A: Upgrade from Local
a) Copy the upgrade NVR firmware to the USB
b) Then click Upgrade from Local
c) Choose the firmware from supplier USB
d) then Click Upgrade
B: Check for Latest Version
the upgrade version already uploads to the server; you can check with Server if your version is already
the latest or not here.
C. Upgrade IPC from USB
a) Copy the upgrade IPC firmware to the USB
b) Then click Upgrade IPC from USB
c) Click Browser to choose the IPC firmware from supplier USB
d) then Click Upgrade
Note: This must be done after
a firmware upgrade to ensure
proper operation of the NVR.
You may retain your settings,
recording schedule and so on by
using the Import/Export
Configuration function before
upgrading the firmware.