User Manual

Device Setting -> Alarm -> Motion
39
On Alarm: Motion Page,
you may set the motion
detection function.
What is Motion Detection?
Motion Detection is the process of detecting a change in the position of an object relative to its
surroundings or a change in the surroundings relative to an object.
There are many approaches for motion detection in a continuous video stream. All of them are based on
comparing of the current video frame with one from the previous frames or with something that we'll call
background.
Enable: Tells whether or not motion detection is enabled on a specific channel.
Motion Detection: Click the applicable Set button to setup the motion detection area for that channel.
See next page for the details
Schedule: Setting the Motion detection Schedule
Action: Here you may define what will happen when the camera you have selected detects motion.
Set Motion Detection
Click Set button next to Motion Detection, you will see a grid of red boxes. The outlined boxes mark the
area that is sensitive to motion. The area without the red outlines is not sensitive to motion.
Use the mouse to move the cursor around the screen. By pressing select or
left clicking an area in the grid, you can toggle motion detection ON or
OFF in that location.
Right click the mouse, you may find the menu, you may set all page or
delete all page.
Sensitivity: The Sensitivity setting is controlled by a
slider, allowing you to set a value between 1 and 50.
The lower the number, the more sensitive the motion
detection will be. In the daylight time, it is suggested to
set higher sensitivity between 10~40. In the night mode,
it is suggested to set lower sensitivity between 40~50
to avoid noise triggers the MD. You may set 4 different
period with different sensitivity.