User Manual

Main Menu: Recording - > Schedule
28
On Recording: Schedule Page,
you may set the recording time
schedule of each channel.
There are three types of recording to set:
Normal: The NVR will constantly record for any period. You won’t miss anything.
Motion: The recommended recording setting for most applications. The NVR will only record when it
detects something moving in front of the camera, and will then only record footage from the camera(s)
that do detect motion unless you alter your Action settings “Alarm: Motion Detection - Action” to include
other channels.
Before setting any of your schedule to Motion, ensure that Motion Detection is properly
configured for the channel(s) you want to associate with it. See “Alarm: Motion” for more
information about setting up and configuring Motion Detection.
None: As the name suggests, the NVR will not record anything.
Copy To (Channel): Located at the base of the screen, with Default on one side and Apply on the other.
This will allow you to copy the schedule from the channel you’re editing to another channel or channels.
Note: if the box after ENABLE is not checked, it will not record as scheduled, but you need to do MANUAL
RECORD.