User Manual

Main Menu: IP Channel
23
On the IP Channel page, you can
• view specific information about cameras
• scan for cameras that the NVR is able to detect that are connected to NVR poe ports or under the same
router with the NVR.
• add cameras to any available channels
• delete cameras from their existing channels
•
Name: Shows the name of the camera associated with the channel.
•
IP Address: The IP address assigned to the camera.
•
Channel: The channel number that the camera is connected to.
•
Status: Tells whether the camera is Previewing, Offline or INVALID PWD.
•
User Name: Admin as default of the camera.
•
Password: If your camera was set password from reolink client before, you need to input the correct
password. If not, the default password is blank and no need to fill in anything.
•
Protocol: Auto. It will connect by detecting the IP camera protocol. Reolink cameras and NVRs work by
private reolink ip protocol.
Select one camera and click Detail,
it will show the camera firmware
version and CPU Loading and bit
rate.
Click the Scan button to generate a list of all cameras that your NVR can detect.