User Manual

Setup Wizard : UID
17
UID: This is the NVR’s Unique
Identifier number which will be
used later to connect your PC
or Smart Phone to the NVR
using Reolink P2P Technology.
Click Send UID, the UID
Number will send to your
sender’s E-mail address. You
may copy the UID code to
Reolink Client for remote
access.
Setup Wizard : DDNS Configuration
DDNS is not required for
Reolink P2P remote access. If
you intend to access your NVR
using older IP technology you
will need to configure this
service.
Use domain name for access,
please forward HTTP port and
server port in your router.
DDNS Type: Choose the server that you’re using. DYNDNS is recommended.
Server Domain Name: Enter the host name that you set up in your DDNS service. This is the address
you use to access your network.
Username and Password: Enter the username and password you setup with your DDNS server. These
do not have to match your username/password combination in either your Camera or router. (for the sake
of security, we suggest making them different).
Confirm Password: Retype the password to confirm
If the test is unsuccessful, a message will appear onscreen informing you that the “Update was
Unsuccessful”. This could mean that there’s a problem with your network setup, or there’s a problem with
the DDNS Account Name and Password you’re using.