User Manual

Setup Wizard : General Configuration

General Configuration

Language: Choose the language you would like the menu system to display.

Video Standard: Choose between NTSC (USA, Canada, Mexico, Japan, Korea and some other regions)

or PAL (UK, Europe, Australia and some other areas). If this is set incorrectly, images from your

cameras may be distorted, black and white.

Resolution: How many pixels the NVR will output. Typically, you may want to set this to be equal to the

native resolution of your monitor/television. It is suggested to set it to 1920*1080 when you need

HDMI monitor connection.

Time Zone: Choose the time zone you are at. It is really important to select the right time zone if you are

using NTP (Network Time Protocol).

Some common Time Zones: In the USA

EST (Eastern Standard Time) is GMT-5:00, PST (Pacific Standard Time) is GMT-

8:00.

UK is GMT +0:00, and the East Coast of Australia is GMT +10:00.

Menu Date Format: How you would like the date to be displayed.

UID: This is the NVR’s Unique Identifier number(16 characters) which will be used later to connect your

PC or Smart Phone to the NVR using Reolink P2P Technology and access to the system anytime

anywhere! Or you may use your phone scan the QR code on the side to add the device.

After finish Settings, click Next to continue.