User Manual

4English
3 English
Camera Connection Diagram
Before using the camera, please connect your camera as instructed
below to finish initial setup.
1. Connect the camera to a LAN port on your router with an Ethernet
cable.
2. Power on the camera with a power adapter.
Camera Introduction
*You may also connect the camera to a PoE Switch/Injector or Reolink
PoE NVR.
Lens
Metal Aluminum Case
SD Card Slot
Waterproof Lid
Network Cable
Power Port(Optional)
Audio in
Earth Wire
Reset Button
Infrared Lights
Daylight Sensor
*Press and hold for 10seconds to restore camera to
factory settings.
Power Adapter
Router
PoE PTZ Camera
Power Cable
Network Cable