December 2020 QSG3_B Reolink E1 Zoom Quick Start Guide 58.03.001.0156 @ReolinkTech https://reolink.
EN Contents 1 What’s in the Box What’s in the Box 2 Camera Introduction 3 Set up the Camera 4 Mount the Camera 5 Troubleshooting 8 Specifications 10 Notification of Compliance 11 English Reolink E1 Series Camera Mounting Plate Power Adapter Reset Needle (For E1 Zoom only) Surveillance Sign Mounting Hole Template Quick Start Guide Pack of Screws English 2
Camera Introduction Set up the Camera Speaker Download and Launch the Reolink App or Client software and follow the onscreen instructions to finish initial setup. Power Port Daylight Sensor Lens • On Smartphone Status LED Scan to download the Reolink App. Built-in Mic Micro SD Card Slot Available on the Reset Button *Rotate the lens to find the reset button and the SD card slot.
Mount the Camera Step 1 Drill two holes on the wall according to the mounting hole template. Step 2 Insert the two plastic anchors into the holes. Step 3 Secure the base unit in place by tightening the screws into the plastic anchors. 5 English Step 4 Align the camera with the bracket and turn the camera unit clockwise to lock it in position. NOTE: 1. To remove it from the wall, turn the camera anticlockwise. 2. In case your camera is mounted upside down, its picture shall be rotated as well.
Tips for Camera Placement Troubleshooting • Do not face the camera towards any light sources. Camera Is Not Powering on • Do not point the camera towards a glass window. Or, it may result in poor image performance because of the window glare by infrared LEDs, ambient lights or status lights. • Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image performance.
and the mobile phone, which enables the camera to focus better. • Try scanning the QR code under a brighter atmosphere. If these won't work, please contact Reolink Support https://support.reolink.com/. WiFi Connection Failed During Initial Setup Process If the camera fails to connect to WiFi, please try the following solutions: • Please make sure the WiFi band meets the network requirement of the camera. • Please ensure you have entered the correct WiFi password.
Software Features Frame Rate: 15fps (default) Audio: Two-way audio IR Cut Filter: Yes General Operating Frequency: 2.4 GHz (E1)/Dual-band (E1 Pro/E1 Zoom) Operating Temperature: -10°C to 55°C (14°F to 131°F) Size: Φ76 x 106 mm Weight: 200g (E1/E1 Pro)/250g(E1 Zoom) Notification of Compliance FCC Compliance Statement This device complies with Part 15 of the FCC Rules.
receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC RF Exposure Warning Statements This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
we strongly suggest that you reset the camera to factory default settings and take out the inserted SD card before returning. Terms and Privacy Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of the reach of children. End User License Agreement By using the Product Software that is embedded on the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink. Learn more: https://reolink.
mobile exposure conditions. The min separation distance is 20cm. Déclaration d'exposition aux radiofréquences pour IC L'appareil a été évalué pour répondre aux exigences générales en matière d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition mobiles. La distance de séparation minimale est de 20cm. Operation of this device is restricted to indoor use only. (5180-5240MHz) Le fonctionnement de cet appareil est limité à une utilisation en intérieur uniquement.
