User Guide

Important Notes of Camera Installation

• PIR Sensor Detecting Distance

The PIR senor has 3 sensitivity levels for your adjustment: Low/Mid/High.

Higher sensitivity oers longer detecting distance. The default sensitivity of the PIR sensor is at “Mid”.

The path to adjust the sensitivity level on Reolink App: Device settings-PIR settings.

Note:

Sensitivity

Detecting Distance

(For moving vehicles)

High

Mid

Low

Up to 10 meters (33ft)

Up to 8 meters (26ft)

Up to 5 meters (16ft)

Value

81 - 100

51 - 80

0 - 50

Up to 10 meters (33ft)

Up to 12 meters (40ft)

Up to 16 meters (52ft)

Detecting Distance

(For moving and living things)

To reduce false alarms, please note that:

• Do not install the camera facing any objects with bright lights, including sunshine,

bright lamp lights, etc.

• Do not place the camera too close to a place where there are frequently moving

vehicles. Based on our numerous tests, the recommended distance between the

camera and the vehicle is 16 meters (52ft).

• Stay away from the outlets, including the air conditioner vents, humidiﬁer outlets, the

heat transfer vents of projectors, etc.

• Do not install the camera where there are strong winds.

• Do not install the camera facing the mirror.

• Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi

routers and phones in order to avoid wireless interference.

Important Notes for Reducing

False Alarms

When in rotating status, the camera will record motion detection videos when the PIR

sensor is triggered, but will not send any push or email notiﬁcations.

Note:

For outdoor use, please install the Argus PT upside down in order to maximize

the waterproof performance and the PIR motion sensor’s eciency.

8 English 9English

For indoor use, the camera can be placed upright, but please make sure to

place it at a maximum of 2.5 meters from the ground.