March 2021 QSG1_B_EN Reolink Argus 3 Series Quick Start Guide 58.03.001.0245 @ReolinkTech https://reolink.
EN What’s in the Box Contents What's in the Box 2 Camera Introduction 3 Set up the Camera 4 Charge the Battery 6 Install the Camera 7 Safety Instructions of Battery Usage 11 Troubleshooting 12 Specifications 13 Notification of Compliance 13 Camera Stand Bracket Security Bracket Loop Strap Reset Needle Micro USB Cable Mounting Template Pack of Screws Surveillance Sign Quick Start Guide NOTE: * Quantity of accessories varies with different camera models that you purchase.
Camera Introduction Set up the Camera Battery Status LED Micro USB Power Port USB Set up the Camera using a Smartphone Step 1 Scan to download the Reolink App from the App Store or Google Play store. Speaker Spotlight Status LED Lens Daylight Sensor Built-in Mic PIR Motion Sensor Reset Button * Press for more than five seconds to reset the device to factory settings. OFF Micro SD Card Slot NOTE: Always keep the rubber plug closed firmly.
Step 3 Launch the Reolink App, and click the “ ” button in the top right corner to add the camera. Scan the QR code on the device and follow the onscreen instructions to finish initial setup. Devices Charge the Battery Cloud You haven't added any device. Please click the"+"button in the top right corner to add Charge the battery with a power adapter. Charging indicator: Set up the Camera on PC (Optional) Step 1 Download and install the Reolink Client: Go to https://reolink.
Mount the Camera 1 Rotate to separate the base from the bracket. 2 Drill holes in accordance with the mounting template and screw the base of the bracket to the wall. Next, attach the other part of the bracket to the base. NOTE: Use the drywall anchors included in the package if needed.
3 Screw the camera to the bracket. 4 Adjust the camera angle to get the best field of view. 5 Secure the camera by turning the part on the bracket identified in the chart clockwise. Place the Camera on a Surface NOTE: To adjust the camera angle later, please loosen the bracket by turning the upper part anticlockwise. If you plan to use the camera indoors and put it on a flat surface, you may place the camera into the stand bracket and adjust the camera angle by slightly rotating the camera back and forth.
Troubleshooting Reolink Argus 3/Argus 3 Pro is not designed for running 24/7 at full capacity or around-the-clock live streaming. It’s designed to record motion events and to live view remotely only when you need it. Learn useful tips on how to extend the battery life in this post: https://support.reolink.com/hc/en-us/articles/360006991893 Camera Is Not Powering on 1. The battery is built-in, so do not remove it from the camera. 2.
• Set your password using only the characters available on the keyboard. General If these won't work, please contact Reolink Support https://support.reolink.com Operating Temperature: -10°C to 55°C (14°F to 131°F) Weather Resistance:IP65 certified weatherproof Size: 121 x 90 x 56 mm Weight (Battery included): 330g (11.
IC statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.
