Quick Start Guide

12English
11 English
If these won't work, please contact Reolink Support
https://support.reolink.com/.
Specifications
Failed to Upgrade the Firmware
If you cannot upgrade the firmware for the camera, try the following
solutions:
• Confirm the current firmware version to see if it is the latest one.
• Make sure that you download the correct firmware from download
center.
• Make sure the network of your computer is stable.
If these won't work, please contact Reolink Support
https://support.reolink.com/.
Operating Temperature: -10°C to 55°C (14°F to 131° F)
Operating Humidity: 10%-90%
IR Distance: 30 meters (100ft)
Day/Night Mode: Auto switchover
Hardware Features
General
Notification of Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
FCC Compliance Statement
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits aredesigned to provide reasonable protection against
harmful interference in aresidential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
Weather Resistance: IP66 waterproof