Operation Manual

Extension Lead Length (m) Min Wire ø (mm²)
30m 2.5
50m 4.0
2. Transporng Machine
1. Install & ghten ring bolt securely.
2. Check liing arm bolts to ensure bolts are securely fastened.
3. Secure liing chain below liing arms and through ring bolt to prevent excess movement
during transport.
4. Ensure all machinery & equipment used to transport the machine are rated for required loads.
Ring Bolt
Liing Arm
(each corner)
3. Specicaons & Parts
Power Supply:
Ensure machine is connected to correct power supply (check machine label to conrm power
supply).
Extension Leads:
Where possible, connect machine directly to power outlet. If an extension lead is required,
ensure lead is under 50m in length. Minimum extension lead diameter are prescribed below: