Installation Instructions

6.
Renusol ConSole · EN · 04/2011 — 7
7.
Fasten the PV module with U profile on the
ConSole mounting rails
Drill a hole 7 mm wide in the edge of the
ConSole through the holes on the clips of
the U profiles (fig. A).
Now fasten the profiles using the supplied
fastening material to the ConSole mounting
rails. Ensure that the washer is between the
nut and the ConSole.
Note:
Start by fastening the U profiles to the
lower side of the ConSole.
Important!
Tighten the 4 M6 screws with a maximum
torque of 10 Nm.
Congratulations,
You have assembled ConSole, the ideal
solution for an installation of PV modules
on flat roofs as the perfect aesthetic
solution, ready to use.
We are pleased that you have completed
a beautiful reference object. If you have
any photographs of the assembly and the
result, please send us the digital reference
photographs, the object data and the
address of the property by e-mail to:
[e-mail].
We regularly award prizes for the most
beautiful reference photos and present
them together with the company logo of
the respective specialized company on
our website.
Thank you very much for your trust in
Renusol.
Assembly completed
Installation result: PV module ready
assembled on the ConSole.
ASSEMBLY
A
Hexagon screw M6 x 20 mm
Module frame
U-Prol
ConSole
Washer
Self locking nut M6
A
Screwdriver 7 mm
Screwdriver 7 mm