Instruction Manual

9
4. Mounting the Wall Bracket
Once the best position for mounting the control panel is decided, mount the
bracket to the wall. Mark the position of the bracket holes on the wall (57mm
between Ø4mm hole centres, see Figure 2). Drill the appropriate holes to mount
the bracket. Care should be taken to avoid any hazards when drilling.
5. Mounting the Control Panel
The Connect Control Panel is mounted to the bracket by firstly locating the top
edge of the Control Panel into the wall bracket and then pushing the bottom
edge into place (see Figure 3).
Installation Instructions (Continued)
Figure 2. Wall Bracket
57mm
Ø4mm
Figure 3. Mounting to Wall Bracket