Instruction Manual

Inserting the SIM

The LongReach Control Panels are supplied with a global SIM card but if the SIM card

needs to be replaced then follow the following steps:

Ensure that the Control Panel is unplugged from the power supply.

Open the Control Panel by unscrewing

the 4 screws. Take care when the

enclosure is open to not detach the

antenna connector from the board.

Insert your SIM card into the slot as

shown. The SIM card should be inserted

with the gold contacts facing the front

of the Control Panel, and with the cut-

o corner outermost. IMPORTANT:

Note the SIM card number and Control

Panel barcode to report to the System

Administrator.

Once you have inserted the SIM close

up the Control Panel and re-tighten the

screws.

The correct APN details for the particular SIM card will need to be written

to a ﬁle on the microSD card. Please contact central support for assistance

with this.

NOTE:

Pozi Drive PZ1 Screw Driver