Instruction Manual

6. Preparing the Extended Antenna

7. Mounting the Extended Antenna

Installation Instructions (Continued)

The antenna should be mounted as high as possible but at least 30cm from the

ceiling (Figure 5). It is also advisable to avoid mounting the antenna near to metal

shelving or cabinets as this will attenuate the signals.

To obtain the best possible signal strength the antenna should be stuck to a non-

conductive surface such as glass or wood. If the surface is metallic then ensure

that there is a spacer of at least 5cm from the surface.

min. 30cm

The extended antenna that is supplied

has a 3m (~9ft) cable and should always

be mounted at a distance greater than

30cm from the enclosure (Figure 6). The

antenna is simply attached to a surface with

adhesive tape as shown below (Figure 4).

Peel back protective

coating to reveal

adhesive tape.

Figure 5. Distance from Ceiling Figure 6. Distance from Enclosure

Figure 4. Adhesive Tape