User Manual Smart 2 in 1 Foot and Calf Massager Model: R-D002RS
CONTENTS 1. Important Safety Instructions 01 2. About the Product 04 3. Using the Product 09 4. App Guide 11 5. Charging 18 6. Maintenance and Cleaning 19 7. Troubleshooting Guide 20 8. Warranty Policy 23 9.
Thank you for purchasing the RENPHO 2 in 1 Foot and Calf Massager! Please read this user manual carefully and use the device only as directed. RENPHO accepts no responsibility for any cause of injuries due to misuse or negligence to follow the instructions outlined. Please keep this manual for future reference. Important Safety Instructions When using this device, the following basic precautions should be always followed: READ ALL INSTRUCTIONS CAREFULLY BEFORE USING. 1.
places. 8. Do not reach for the device that has fallen into the water. Unplug immediately. WARNING – To reduce the risk of burns, fire, electric shock or injury to persons: 1. Please consult your doctor before using if you are a user of the following types： 1) Persons suffering from thrombus, severe aneurysm, malignant tumor, venous tumor, skin infections, etc.
cause fire, electric shock, or injury to persons. 4. Close supervision is necessary when this device is used by, on, or near children, invalids, or disabled persons. 5. Never operate this device if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the device to a service center for examination and repair. 6. Do not carry this device by the supply cord or use the cord as a handle. Keep the cord away from heated surfaces. 7.
unattended use of heat by children or incapacitated persons may be dangerous. 24. Temperatures sufficiently high to cause burns may occur regardless of the control setting. Do not use the device on an infant or invalid or on a sleeping or unconscious person. Check the skin in contact with the heated area of the device frequently to reduce the risk of blistering. SAVE THESE INSTRUCTIONS About the Product 1. What’s in the Box 1 × RENPHO 2 in 1 Foot and Calf Massager 1 × Remote Control 1 × User Manual 2.
3. Product Introduction Control Panel Calf Massager LED Light Detachable Calf Cover with Zipper Charging Port Detachable Foot Cover with Zipper Type-C Charging Port Control Panel Foot Massager Remote Control Control Panel (1) Foot Massager Tap to turn on/off the foot massager only OR both the foot massager and calf massager if they work together. Tap to cycle through 15 (Default), 20, 25 and 30min. Tap to cycle through Level 1 (Default), Level 2, Level 3, Level 4 and OFF.
Tap to cycle through Level 1 (Default), Level 2, Level 3, Level 4 and OFF. Tap to cycle through Full (Default), Bottom, Instep and OFF. The indicator will be on once the pairing is successful. (2) Calf Massager Long press to turn on the calf massager only. Long/short press to turn off the calf massager only. Short press to turn on/off the heat function (On, default). Press and hold for 3s to turn on/off the LED light. Press to cycle intensity level through Light (Default), Medium and High.
Remote Control OFF OFF C Calf Mode Intensity Heat Power Foot Heat Knead Intensity Time Air Intensity Press to turn off the calf massager only. Short press to turn on/off the heat function (On, default). C Calf Press to cycle intensity level through Light (Default), Medium and High. Press to cycle through Mode 1 (Default), Mode 2 and Mode 3. Press to turn on/off the foot massager only OR both the foot massager and calf massager if they work together.
Note: a. Please remove the isolation strip from the battery when you use the remote control for the first time. b. To prolong the battery life, remove the battery from the remote control when not in use for a long time. c. The remote control can be magnetically attached to the device when not in use. d. The LED light can only be controlled by the Heat button on the control panel of the calf massager.
Using the Product 1. Recommended Massage Postures Note: a. It is not recommended to use the device for more than 30 minutes each time. b. To avoid any injury, do not stand up during the massage. 2. Operation Work Together (Foot massager+Calf massager) (1) Connect the power cord to the power supply, and the Power indicator on the foot massager will flash white, followed by a beep, indicating that the foot and calf massager is in standby mode.
remote control to turn on the foot massager. (3) Select massage options pressing the corresponding buttons on the control panel or remote control according to your preference. (4) Tap the Power button on the control panel of the foot massager or press the Power button on the remote control to turn the foot massager off after the foot massage is complete.
3. Memory Function (1) Foot massager The foot massager will recall the last settings once turned on again. However, the foot massager will go back to the default settings if you reconnect the power cord to the power supply and then turn it on or it is in DIY mode before switching off. (2) Calf massager The calf massager will recall the last settings once turned on again. However, the calf massager will go back to the default settings if it is in DIY mode before switching off. App Guide 1.
Method 1 a. Refresh the “Home Page” and a window will pop up on the phone screen. b. Tap “Pair” to pair the App with the device. Method 2 a. Tap “+” on the top right corner of the “Home Page” to connect manually. b. Select “Massage” and tap “2 in 1 Foot and Calf Massager”. c. A window will pop up on the phone screen and tap “+” to pair the App with the device.
4. Massage Massage (1) Foot Massage a. Tap the “Device Page” to choose “2 in 1 Foot and Calf Massager R-D002RS”. b. Tap “ ” on the homepage bottom to turn on/off the foot massager. c. Select massage options among Time, Air Intensity, Knead Intensity and Heat according to your preference.
(2) Calf Massage a. Tap the “Device Page” to choose “2 in 1 Foot and Calf Massager R-D002RS”. b. Tap “ ” on the right top of the calf massage section to turn on/off the calf massager. c. Select massage options among Mode, Air Intensity and Heat according to your preference.
5. DIY Mode a. Tap “DIY” on the homepage to DIY your massage session. b. Tap “Add” on the “DIY List Page” to add your customized settings. On the “Add Stage Page”, you can enter a name for your customized settings and choose a time range. c. Tap “ ” to edit the massage stage.
* Edit the massage stage a. Tap “Timer” to choose a duration time. b. Select the massage options for foot and calf massage according to your preference. *For foot massage, if the 2-tier or above air intensity is selected, you can choose the compression hold time and turn on/off the roller during the compression holding process. c. Tap “Save” to save the massage stage. d. If you want to add more stages, tap “Add Stage” and repeat the above steps.
d. The longer compression hold time you select, the more pressure you may get. It is recommended to switch the roller off if you feel any discomfort during the compression holding process. 6. Favorite Setting * Ensure that the device is on before setting your favorites. a. On the homepage, select the massage options for foot and calf massage according to your preference. b. Tap “ ” on the top right corner of the homepage to enter a name for your favorite settings and confirm. c.
Charging *Only the calf massager can be charged. 1. Low Battery Reminder When the calf massager is in low battery, its lowest battery level indicator will flash. 2. Charging the Calf Massager Method 1: Place the calf massager back to the charging port of the foot massager and connect the power cord to the power supply to charge the calf massager. Method 2: Charge the calf massager using a Type-C cable (not included) and a DC 5V 2A mobile charger (not included).
Maintenance and Cleaning 1. The use of non-rated voltage is prohibited. 2. Unplug the device after use. 3. It is prohibited for non-professional personnel to repair the device or replace its parts. 4. The device is temperature protected. It will automatically shut off when the temperature exceeds the safety limit. 5. Unplug the device before cleaning. 6. Use a soft cotton cloth and neutral detergent to clean the main body. 7. The covers are detachable and washable. Unzip and wash them.
Troubleshooting Guide Part Problem Cause Solution Short press the Power button on the control panel. Long press the Power button to turn the calf massager on, while short press to turn it off. Low Battery. Place the calf massager back to the charging port on the foot massager and connect the power cord to the power supply to charge. The foot massager may be broken and do not help charge the calf massager. Charge the calf massager using a Type-C charging cable and a DC 5V 2A mobile charger.
Part Foot Massager Problem Cause Solution Power-on failure. The power plug is not inserted properly. 1. Check the plug. 2. Check the Power indicator. Fail to adjust the heat. Press the Heat button to cycle through Full, Bottom, Instep and OFF. The foot massager is still warming up. Wait for 7-8 minutes after turning on the foot massager. The kneading intensity function does not work well. Fail to adjust the kneading intensity to a suitable level.
Part Problem Cause Solution App The phone is too operation far away from the does not device. work. Keep the phone close to the device. Slow app Poor network. loading. Operate the App in an environment with good Internet access. App Page bounce. Tap too quickly. Re-tap later. App program error. Close the App and then reopen it. Device program error. Turn off the device and then on again. The App Describe the does not problem in detail. work well.
Warranty Policy Your RENPHO product purchase is covered by a one-year limited manufacturer warranty from the date of delivery. For warranty terms and conditions, please visit: https://renpho.com/pages/warranty-terms-and-conditions Note: Product registration is not required for the warranty. If you choose not to register your product, it will not diminish the product warranty. Customer Service Please feel free to contact us if you have any questions or concerns.
FCC Regulatory Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
(2)This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
US Importer: JOICOM CORPORATION 14129 The Merge Street, Building 3 Unit A, Eastvale, CA 92880 Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd. Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, 518000 P.R.
印刷方式：骑马钉 尺寸： 98*135mm 材质： 128g铜版纸 此页无需印刷
