Thank you for choosing REOPEN! The scale is specially designed to test your Body Water, Bone Mass, Metabolic Age, Weight, BMI, Body Fat, Subcutaneous Fat, Visceral Fat, Skeletal d Muscle, Muscle Mass, Protein, BMR, Fat-free Body Weight It works with the "Reopen Health” App and can be used as a helpful too! to control! your weight. To ensure proper operation, please read this User Manual carefully before operating it. CAUTION! When using this scale, certain basic safety precautions must be followed. 1.
on wet and slippery surfaces. 7. The scale is fragile, please handle it with care. 8. This scale is a high-precision measuring device. Never jump on, stomp on, or disassemble the scale. Handle It carefully to avoid breakage. 8. The scale Is not waterproof; never immerse the scale in water. To clean the surface, use a damp cloth or glass cleaner. Do not use soap or other chemical cleaning agents. 10. Always use the scale on a solid, flat surface and ensure the scale [5 kept completely still while weighing.
ABOUT BATTERIES 1. DO NOT mix new and used batteries. 2. The original batteries provided are NOT rechargeable. DO NOT attempt to recharge the batteries. 3.To insert or replace the batteries, open the battery compare men located underside the unit. When inserting the batter ies, always observe the correct polarity Please put the 3xAAA batteries into the battery compartment with the correct anode and cathode orientation . If the low battery indicator appears on the display, replace the batteries.
$k Bluetooth Connection: This symbol flashes when Bluetooth is not connected, and the symbol stays on when Bluetooth Is successfully connected. Switch weight unit through App. “Err” symbol on the display indicates that the scale is overloaded. Please note that the maximum measurable weight for this unit is 400 1b. “Lo* If this symbol flashes, it indicates that the battery power is low. Please replace the battery.
3. Application Download Download and install the free "Reopen Health" App to your smartphone. Note: Due to continuing updates and improvements, the "Reopen Health" App may appear slightly different. 4. Register Use the mall address to register the account and complete the personal information; this information is used in calculating your measurements. Mote: You may also log in using Guest mode if you do not wish to register, but your measurement data will not be saved if you change a phone.
. Login Users can create a new Boe in account or log In directly with La an existing REOPEN App account. 8, Add device Method 1 1. Turn on Bluetooth on your smartphone. {Android phones also need to tum on GPS) 2. Step on the scale and Walt for the screen to light up. 3. After the screen lights up, click the “Pair on the App to pair the scale with the App. Note: Phone setting can not connect the scale, please got Reopen Health app for connection.
Method 2 1. Click the "Add device” on the top right comer of the Health page. 2. Click the “Body Fat Scale”. 3. Step on the scale with bare and dry feet on the scales electrodes. 4. After the device name shows up, click to add the device.
7. Measure 1. Click the device on the Device page to enter the weight homepage. 2. Keep the phone's Bluetooth on. 3. Stand on the scale barefoot, separate our legs naturally and cover the electrodes on both sides, and stand stably until the end of the measurement. After the measurement is complete, the App will display the measured data.
8, Weight Homepage On the weight homepage vou can view your latest measurement data, goal completion status, comparison status, or add a member: Go to Setting > User management > Add a member.
Baby Holding Mode 1. In the "User management” interface, add Baby User. Then fill in your baby’s information. 2.
3. Three steps to get your baby's weight measurement: Step 1: Adult weighs first, stay still until the data is stable, then step off the scale. Step 2: Hold your baby, then step onto the scale again and stay still.
IMPORTANT! Reconciliation: if the scale has been moved or turned upside down, it must be re calibrated to ensure accurate results. 1. Please place your scale in a firm and flat, stable location. Av old any carpeting. 2. Place one foot on the scale to wake 1t up, 3. When the monster shows digits, remove your foot. 4. Then scale will show "CAL" then "0.0" or The re calibration process is complete.
ADVISE FOR USE & CARE 1. Treat the scale with care as iris a precise instrument. 2. Clean the scale with a damp cloth and avoid water getting inside the scale. DO NOT use chemical or abrasive cleaning agents. 3. Keep the scale in a cool place with dry air. 4. Always keep your scale in a horizontal position. Fae 1. Why isn't the scale detecting body fat and/or other data? Ensure your feet are dry and bare. Stand firmly on the scale with feet apart, facing the LED digital display.
A. Open "Reopen Health” App. B. Step one foot on the scale surface to wake it up. . After a few seconds of loading, the scale mode! number will appear, tap it. 0. Step on the scale again to complete the pairing. 3. Why is my body weight not accurate? if you think you are getting an inaccurate weight measurement, please try below steps to fix the problem inaccurate issues: 1) Pace the scale on a hard and flat surface. Softer floors such as carpet would cause inaccuracies.
8. No body fat measured when weighing, what's wrong? Step on with dry and bare fest. Ensure Bluetooth is enabled and working. Ensure personal data is entered, 8. How to restart the scale? First, take one of the batteries oul of the scale. Then, put back the batteries and wall for 5 seconds. Now the scale has been automatic restart, you can step onion the scale. 7. Body composition inaccurate? Body composition analysis is an inexact science, regardless of the manufacturer or method of measurement.
Vibe aie eo Your REOPEN product purchase is covered by a one-year limited manufacturer warranty from the date of delivery, For warranty terms and conditions, please visit: Note: Product registration is not required for the warranty. If you choose nat to register your product, It will not diminish the product warranty.
compliance This sicced complies wih part 16 of the FCO Rules, Operation Is subject to the following two conditions: {1} This device may not cause harmful Interference, and (7) this device rust accept any interference received, eluding interference that may cause undesired operation.
