Installation Guide

30
Compatibility
RENOGY Solar Module
Compatibility*
RNG-10D
COMPATIBLE
RNG-10D-SS
COMPATIBLE
RNG-20D
COMPATIBLE
RNG-30D
COMPATIBLE
RNG-30D-SS
COMPATIBLE
RNG-50D
COMPATIBLE
RNG-50D-SS
COMPATIBLE
RNG-80D-SS
COMPATIBLE
RNG-100D
COMPATIBLE
RNG-100D-S
COMPATIBLE
RNG-100D-SS
COMPATIBLE
RNG-100D-SSP
COMPATIBLE
RNG-100MB
COMPATIBLE
RNG-100D-R
COMPATIBLE
RNG-160D-SS
COMPATIBLE
RNG-300D
**
RNG-50P
COMPATIBLE
RNG-100P
COMPATIBLE
RNG-160P
COMPATIBLE
RNG-270P
**
RNG-320P
**
*This list is not comprehensive and is intended for an “at-a-glance” look at which solar modules provided
by Renogy are compatible with the Bracket Mounting System. Modules provided by other manufacturers
may work with the Bracket Mounting System provided the follow conditions are met:
1) Solar module weight does not exceed 88 lbs (40 kg) or total load per bracket does not exceed 22
lbs (10 kg).
2) Solar module framing material is constructed of an aluminum alloy.
3) If using a panel oriented such that the distance between Brackets along an edge exceeds 39 in
(1 m), it is advisable to add Brackets for mid-span support. Lack of mid-span support can cause
excessive stress in the module under load and may result in solar module damage. Consult with
your solar module manufacturer if you are unsure of the compatibility.
**These modules require the installation of 2 Bracket sets to ensure the modules do not excessively flex
in their mid-span (a total of 8 pairs of Brackets per module).
Renogy reserves the right to change the contents of this manual without notice.