Full Product Manual

CHARGING VIA AC OR WALL
Electrical shock can occur if the AC cord is damaged or frayed. NEVER use a damaged cord.
Contact the manufacturer if the cord is damaged.
Connect the 2-pin inlet AC cable that is included with the unit . The unit can be charged in
the vertical or horizontal position.
Electrical shock can occur if the cord is damaged or frayed. NEVER use a damaged cord. Contact
the manufacturer if the cord is damaged.
Use the provided CIG to DC Cable in order to charge the Phoenix through a 12V DC Source or your
car. It will take about 5 hours to fully recharge the internal battery.
Turn off the main power
When charging via AC 2-pin inlet, it is recommended that the power button be in the OFF
position and the AC and DC output terminals not be used.
It will take about 5 hours to fully recharge the
internal battery. Do not cover or block the exhaust
vents when charging with the AC cable.
CHARGING VIA CAR / CIG PORT
CHARGING VIA AC
Charging is also possible through compatible additional solar panels and using the MC4 to
4.5mm
DC IN cord included with your Phoenix. The following represents approximate charge
times from 0% to 100%.
Compatible Solar Panels
• Renogy 10w Mono
• Renogy 20w Mono
• Renogy 30w Mono
• Renogy 50w Mono
• Renogy 50w Poly
• Renogy 60w Suitcase
• Renogy 100w Mono
• Renogy 100w Eclipse
• Renogy 100w Poly
• Renogy 100w Suitcase
12V Solar Panel
• To speed up the charging
time, a 12V solar panel can
be used at the DC input
terminal with a maximum
of input of 100 Watts.
MC4 to 4.5mm DC IN Cord
Additional Solar Panel Charging Time
10W 10 hours
20W 6 hours
30W 5.5 hours
40W 5 hours
50W 4 hours
60W 3.5 hours
100W 2.5 hours
Make sure the Voc of the solar panel does
not exceed 25V. Heating will slow a charging
process, therefore, it is recommended to have
the Phoenix placed in the shade when charging
via external solar panels.