Full Product Manual

System Status Troubleshooting

PV indicator Troubleshoot

BATT Indicator Troubleshoot

Load Indicator Troubleshoot

Error Indicator Troubleshoot

Off during daylight

Using a multimeter check the battery voltage and verify it is not

exceeding 32 volts.

Disconnect loads, if any, and let the PV modules charge the battery bank.

Use a multi-meter to frequently check on any change in battery voltage to

see if condition improves. This should ensure a fast charge. Otherwise,

monitor the system and check to see if system improves.

The Load circuit on the controller is being shorted or overloaded. Please

ensure the device is properly connected to the controller and make sure it

does not exceed 20A (DC).

White Slow Flashing

White Fast Flashing

WhiteSolid System Error. Please check LCD for Error code

Ensure that the PV wires are correctly and tightly secured inside the

charge controller PV terminals. Use a multi-meter to make sure the

poles are correctly connected to the charge controller.

Error Codes

E4 Load short circuit

E5 Load overloaded

E10

Error Number Description

PV over-voltage

PV reverse polarity

PV input over-current

Controller over-temperature

Battery over-voltage

Battery over-discharged

No error detected

Battery under-voltage

E13