Full Product Manual
17
Displays ambient temperature and battery temperature
(Remote temperature sensor needed)
Displays Kilowatt hours charged today, and average
Kilowatt hours charged per day
Use the UP and DOWN buttons then press OK button
to enter the desired setting.
1. Device Set
System Settings Display
Screen 8
Screen 7
To enter the following screen long press OK button on any of the main menu screens.
1. Device ID: Controller’s model number
2. BackLight Time: On/Off
3. Error Alarm: On/Off
4. SOC: Turns SOC % on main display on/off
BATT CHARGE KWH TODAY
BATT CHARGE KWH/DAY
0KWH
1.927KWH
DEVICE TEMPERATURE
BATT TEMPERATURE
29℃
25℃
Set Menus
1.Device Set
2.Parameter Set
3.System Log
4.Password
5.Factory Reset
6.Device Information
1.Device ID: C100-0001
2.BackLight Time: ON
3.Error Alarm: OFF
4.SOC: ON