Full Product Manual

15
Change the Parameters
Simply hold the “ENTER” button for approximately 5 seconds until the display flashes. Once
flashing, then press “SELECT” until the desired parameter is reached and press “ENTER” one
more time to lock in the parameter.
NOTE: The screen must be at the appropriate interface in order to change the specific
parameter.
1. Power Generation Interface  Reset
The user is able to reset the current power generation (kWh) back to 0 kWh.
2. Battery Interface  Set Battery Type
In this interface, the user is able to select which type of battery is connected to the charge
controller. Choose from Sealed, Gel, or Flooded batteries.
3. Battery Temperature Interface  Change from C° to F°
The user can select between displaying battery temperature in Celsius or Fahrenheit.
ENTER
Cycles backwards through the different select screens
&
Customize some parameters on the charge controller