Manualshelf

Full Product Manual

ManualsBrandsRenogy ManualsElectrical12-Volt 30 Amp PWM Flush Mount Solar Charge Controller with LCD Display
11121314151617181920
14
Operation
After connecting the battery to the charge controller, the controller will turn on automatically.
Assuming normal operation, the charge controller will cycle through different display. They are
as follows:
Parameter
Display
PV Array Voltage
PV 0.0
V
Charging Current
PV 0.0
A
Generated Energy
PV 0.0
kWh
Battery Voltage
BATT 0.0
V
Temperature
BATT 0.0
F°
The Adventurer is an easy to use controller requiring minimal maintenance. The user is able to
adjust some parameters based on the display screen. The user can manually cycle through the
display screens by using the “SELECT” and “ENTER” buttons
SELECT
Cycles forwards through the different display screens.
ENTER
Cycles backwards through the different select screens
&
Customize some parameters on the charge controller