Full Product Manual

5- Install Solar Panels with End Clamps and Mid Clamps

WARNING! Keep hands clear of pinch points!

Step 1: Push the strut channel nut with plastic wing into the cross beam from

side. Then turn the plastic wing 90 degrees to align with the cross beam.

Step 2: Put solar panel in the desired position on top of the cross beam.

Step 3: Put end clamp and mid clamp on top of strut channel nut, fasten with a

M8x50 socket head screw, a M8 split lock washer, a M8 flat washer

Step 4: Repeat step 1 to 3 for all end clamps and mid clamps until all panels are

securely installed