Full Product Manual

Step 1: Attach the angle adjustment connector to the connector with a M8x50

socket head screw, a M8 split lock washer, a M8 flat washer and a M8 hex nut.

Step 2: Attach the main girder to the connector with a M12x100 socket head

screw, a M12 split lock washer, a M12 flat washer and a M12 hex nut.

Step 3: Choose the desired angle from 10 to 50 degrees for the main girder by

choosing suitable installation hole. Attach the angel adjustment connector to the

main girder with a M8x50 socket head screw, a M12 split lock washer, a M8 flat

washer and a M8 hex nut.

4- Install Cross Beams on Main Girder

WARNING! Keep hands clear of pinch points!

Attach cross beam to the top of main girder with 2 pieces of M10x20 socket head

screw, M10 split lock washer, M10 flat washer and M 12 hex nut. Repeat to

install all 4 cross beams.