Manualshelf

Full Product Manual

ManualsBrandsRenogy ManualsAlternative Energy SolutionsViewStar 20 Amp PWM Solar Charge Controller with LCD Display
12345678910
8
INVERTER
BATTERY
CHARGER
HIGH AMP
DRAWING DEVICE
Installation
Recommended tools to have before installation:
Flathead Screwdriver
Multi-Meter
WARNING: Connect battery terminal wires to the charge controller FIRST then connect the solar
panel(s) to the charge controller. NEVER connect solar panel to charge controller before the battery.
WARNING: Do NOT connect any inverters or battery chargers into the load terminal of the charge
controller.
CAUTION: Do not over-torque or over tighten the screw terminals. This could potentially break
the piece that holds the wire to the charge controller.
CAUTION: Refer to the technical specifications for max wire sizes on the controller and for the
maximum amperage going through wires.
You are now ready to begin connecting your battery to your charge controller.