Full Product Manual

13
1. Monitoring
Use to maneuver through the screens
Indicates the voltage (V) and amperage (A) that the
solar panel(s) are delivering to the controller
Indicates the voltage (V) and amperage (A) that the
solar panel(s) are delivering to the battery
Indicates the ambient temperature as well as the SOC
(State of charge) of the battery
NOTE: If the remote temperature sensor is connected,
the temperature will reflect that temperature instead
Indicates Load voltage (V) and amperage (A) draw
System status of components—PV panels, Battery
status, Load status, and Device functionality. Refer to
System Status Glossary for more information
The kilowatt hours accumulated in a day, Month, and
total since the controller has been turned on
NOTE: Once the battery is disconnected, the values are
reset to 0 unless there is an external battery installed
on the controller face
System status icons, date, and time. Refer to System
Status Icons for more information
Charg. Energy
Day: 0.00kWh
Mon: 0.00kWh
Total: 0.00kWh
PV: Disconnect
BATT: NoCharge/ Normal
LOAD: On
DEVICE: Normal
LOAD
12.5V 0.0A
TEMP 20.0 C °
SOC 7%
BATT
12.5V 0.0A
PV
0.0V 0.0A
 / -
 / 
Jan01 12:12:12