Full Product Manual

Operation

After connecting the battery to the charge controller, the controller will turn on automatically. The

user will be prompted by an initialization screen for a few seconds followed by the Default Screen.

Use the following buttons to maneuver

through the menu:

Menu / Cursor Left

Cursor up / Number add

button

Cursor down / Number

reduce button

Enter / Cursor right button

Select to display the screen

selection

NOTE: In some models, you might be prompted to enter a password. Simply put “0” all the way

through and press enter.

NOTE: To customize charge parameters, TYPE must be set to USER under 5. Rated Value.

NOTE: The values found in your controller are default values and will not necessarily match the

ones listed. The values on this table are to show the user what the different screens are used for.

NOTE: You do NOT have to program the control. These parameters are for extra features. Once you

connect the battery the settings are automatically synced.

MENU/ 

 / 

 / -

ENTER/ 

Welcome

V2.37+V2.65

Jan01 12:12:12

1. Monitoring

2. Device Set

3. Parameter Set

4. Load Set

5. Rated Value

6. Test Mode

7. Password

8. Battery Mng Mode

9. Factory Reset

10. Reboot Device

MENU/ 