Manualshelf

Full Product Manual

ManualsBrandsRenogy ManualsAlternative Energy Solutions10 Amp PWM Duo Battery Solar Charge Controller
12345678910
10
Battery
Connect Battery 1: Refer to Figure 4, Connect the negative terminal of Battery 1 to the
negative terminal of the charge controller under the Battery 1 logo. Then connect the positive
terminal of Battery 1 to the positive terminal of the charge controller under the Battery 1 logo.
Connect Battery 2: Repeat the process described in last step for Battery 2. Figure 4 shows
the connections. If you are not planning on installing a second battery you can skip this step.
1
2
3