Manualshelf

Installation Guide

ManualsBrandsRENNLINE ManualsUpgrade KitRENNLINE 911 LED or HID Headlight Upgrade Kit
12345678910
Table Of Contents
Page | 2 Rev A 10/19
Uninstall the projector shroud from the headlight assembly. Remove the four screws
holding the projector shroud to the projector. Remove the lower two screws by inserting
the screw driver through the holes in the projector bracket.
1. Install the Angel LED into the projector shroud. Orient the wires to the bottom of the
shroud. The bottom is designated by the screw mounting locations that are further apart.