Manualshelf

Installation Guide

ManualsBrandsRENNLINE ManualsUpgrade KitRENNLINE 911 LED or HID Headlight Upgrade Kit
567891011121314
Table Of Contents
Page | 2 Rev A 10/19
1. Mark the location of the parking light on the back of the projector surround. Use the
rounded edge of the cutout in the frame indicated below to mark the center location.
2. Remove the projector surround from the headlight frame.
3. Drill a 3/8” hole at the marked location.
4. Thread the parking light through from the front of the projector surround. Secure in place
using the supplied nut. Finger tight only.