Installation Guide
Table Of Contents
Page | 4 Rev A 10/19
4. Use the supplied terminals to complete the wiring:
a) Use the small diameter supplied spade terminals for the three wires coming from the
LED module
b) Use the larger diameter supplied spade terminals for the connections to the vehicle
chassis.
i) Connect the black wire from the LED module to vehicle ground wire.
ii) Connect the white wire to the parking light wire in the headlight bucket
iii) Connect the orange wire to the turn signal light wire in the headlight bucket.
5. Refer to the Rennline LED Headlight Upgrade kit Installation Guide to complete the
headlight installation.